close

Вход

Забыли?

вход по аккаунту

?

GB402739

код для вставкиСкачать
[loading]
«
Click the Minesoft logo at anytime to completely reset the Document
Explorer.
[1][(4)__Full Text.......]
Click to view (and print) basic analytics showing the makeup of
discovered items in this publication. [help.png]
[2][_] (4/ 4)
You can use the refine box to refine the discovered items in the
sections below.<br/>Simply type what you are looking for, any items
that do not match will be temporarily hidden. [3]____________________
[4][_]
Molecules have been hidden so that you can clearly see the results
identified from your search result.<br/><br/>Please click here to
re-instate all molecules found in this document.
Molecule
(3/ 3)
[5][_]
aone
(1)
[6][_]
bpen
(1)
[7][_]
copper
(1)
[8][_]
Molecules have been hidden so that you can clearly see the results
identified from your search result.<br/><br/>Please click here to
re-instate all molecules found in this document.
Physical
(1/ 1)
[9][_]
8 s
(1)
Publication
_________________________________________________________________
Number GB402739A
i»?
Title
_________________________________________________________________
EN Title Improvements in or relating to gas cocks
Abstract
_________________________________________________________________
402,739. Valves. FAURE PERE ET FILS, Revin, Ardennes, France. March 4,
1932, No. 6589. Void [Abridged as open to inspection under Sect. 91 of
the Acts, May 9, 1932]. [Class 135.] In a gas cock in which the
regulation of the discharge is effected by a needle valve cooperating
with a conical nozzle, the supply port of the plug remains fully open
until the discharge is reduced to a minimum or even to zero and
conversely the said port is fully open again before the discharge
begins to increase from the minimum. The cock body a is provided with
a lateral supply passage f and an internally threaded extension a<1>
in which the conical nozzle c is adjustably mounted. The needle valve
p which co-operates with the orifice c<1> of the nozzle c is guided
partly by projections p<1> sliding in slots in a web i in the
extension a<1> and partly by its head t, which slides in the plug b. A
cam surface t<1> on the head t is forced against a projection v inside
the plug b by a spring z. An operating knob q is secured on a square
portion bl of the plug. The port b2 in the plug is of such length that
the passage f is fully open when the pin v is at the top of the face
t<1>, the discharge then being a minimum or even zero. The projection
v engages the horizontal surface t<2> while the passage f is being
closed.
Description
_________________________________________________________________
a o a Paethbe -3 vo
NOTE-The app Ioation for a Patent has bewcome void.
12 (1 This print shows the Specification as it became open to public
inspection on 9 Maay, 1932, under Section 91 (4) (a) of the Acts.
PATENT SPECIFICATION
We, FAURE PBRE and FILS (SOCIATE A RESPONSABILITE LIMITAB), of Revin,
(Ardennes), France, a French Company, do hereby declare the nature of
this invention and in what manner the same is to be performed, to be
particularly described and ascertained in and by the following
statement:The present invention relates to a gas cock for heaters, gas stoves
and other appliances where the gas flow is regulated by means of the
displacement of a cylindrical needle, or pin valve within a conical
nozzle mounted at the extremity -1, of said cock.
The Specification following here below will, on hand of the appended
drawing which is given by way of example, fully explain the manner in
which the invention may be carried into effect.
Figure 1 shows a section of the said cock.
Figures 2, 3 and 4 are sections through X-X of Figure 1 showing the
cock in different working positions.
Figure 5 is a front view of the plug of the said cock.
Figure 6 shows a diagrammatic view of the assembled apparatus mounted
in its place on the gas pipe or bracket.
The cock consists of the body a which forms the dome of the cock, of a
hollowed out plug b of a pin or needle p and of a nozzle c which is
adapted to be screwed on to the extremity of the member a.
The said body of the cock is adapted to be mounted on to the gas
supply pipe of the heater or stove by means of a threaded socket m the
central channel f of which makes the connection between the gas supply
pipe and the interior of the cock The body or dome of the said cock,
which has a conical bore a accommodates at its rear part, the plug b
of the cock, M at its middle part it acts as a guiding device for the
pin or needlo at i by means of a slide or slot wherein the pin pl
which is intewral with the pin or needle can lPrice 11-l 402,739
freely slide The front extremity al of the body or dome a is provided
with a;n screw thread into which the conical nozzle c of the needle
valve may be screwed, the needle p of said valve being free to move up
or down therein.
The hollow and conical plug of the cock 55 b is provided at one of its
extremities with a squared shoulder bt on which the knurled knob q is
mounted, said knob allowing the plug to be rotated and thereby
admitting or shutting off the flow of 60 gas An oblong opening or slit
b 2 which is provided in the conical plug b on a level corresponding
to that of the channel / of the body or dome of the cock, ensures a
communication with the gas supply pipe 65 by means of said channel f
This slot or slit is arranged in such a manner and at such a place,
that it is only after the pin or needle has been pushed into the
needle valve nozzle c a position which 70 corresponds to the maximal
reduction of the flow of gas through the valve nozzle c, that the
passage f is closed by the dome of the cock The interior of the cock
is therefore in unrestricted communication 75 with the gas supply, as
soon as the needle is displaced in the valve nozzle c LI short there
is no throttling of the gas as it arrives in the cock, and the opening
thus attained in the bodies or domes ot 80 the cocks is of the type
called " all or nothing ".
The needle b of the needle valve consists of a rod cut off from the
bar made of copper and of a cylindrical shape is 85 guided on the one
hand in the body a of the cock, at i by means of the pin p 1 which
only allows it to effect longitudinal displacements, and prevents it
from rotating or turning on itself, and on the other 90 band it is
guided in the plug b by means of a cam or head piece t; this cam, cut
in whistle shape rest against a pin or stop 97 fixed to the plug b and
is acted upon by the pressure of the spring z the last 35 turn or
spiral of which rests on the transApplication Date: March 4, 1932 No
6589/32.
Complete not Accepted.
COMPLETE SPECIFICATION.
Improvements in or relating to Gas Cocks.
402,739 versal member or internal rib: of the body tz, said rib
serving as a slide for the pin p I of the needle The nozzle e of the
needle valve which is provided with a screw thread on its outside, is
mounted or screwed"on the front extremity a' of the gas cock; the
nozzle has a centrai opening or hole with a cylindrical mouth c' the
opening then conjo tinuing towards the interior by a conical or
tapered part c 2 The displacement or adjustment of the nozzle c on the
socket' a' of the ';bod ai, allow the cross section of the passage at
v for the gas to be varied for one and the same posltioni' of the'
needle p.
When th'c 6 ko'e is bpen (i e in the positio N shown in Figures 1 and
2) the needle valve is at its -highest position, (looking at
Fgrur)'and the {as flowing through 1 theand hhnnel I passes through
the slot or slit b 2 in the plug b into the body 'of the' cock'a from
which it' efiierges at a maximal quantity of flow tlfroueh the passage
'v of the 'nozzle c The flow of gas is regulated by turning the
knurled knob 'j which movement moves the plug in the sense of the
arrow shown in Figure 2, and in consequence of' this movement the pin
u moves, and as 'this pin is in 'contact with the acclivity of tl of
the cam t which forms the -head of the needle or pin p, causes the
latter to"-compress the spring x, and -to enter the nozzle c to a
greater -or les'se'r aiioutit', thus, reducing the 'cross section' of
the outlet orifice for the gas when the needle or pin p has arrived
at' the end of its course, the plug is in the positioin shown in
Figure 3 from which it -40 is seen that the channel f is still in com
munication with the interior of the said gas cock.
By still further turning, the knob q in the'same direction (which
direction is 'that /5 shown in the a-rows shown in Figures 9, 3 and'
4) the plu 'closes the communicating duct j by the fact' that a full
part of the plti is now brought in fromt of the said' channel such
position being shown in Figure 4.
During this' rotation (i e from the position shown in Figure 3 to
that'shown in Figure 4) th'o needle of the needle valve has remained
stationirv at its extrerime position 'when it is fully pushedi down
into the nozle opening; the stop pin v is thein resting -on
the'horizonital portion to of 'the cam t which forms the continuation
to the inclined plane ori acclivity tl.
The 'codk b inmg coxtp Ietely 'closed '(position shown in Figure 4) it
is easily uiiddistood that by ttrning tthe knurled knob q in the
opposite direction, the plug>, in tu'ritin Q-frees, or opens 'the
orifice I before the' needle or pin of the needle valve is moved
backwards, (that is to say upwards if one X looks; at Bigire 1) by
reason of the action of the spring thus leaving the passage i' the
nozzle c free for the flow of gas In fact, diwing the closure, it is
only after 70 the needle has beet brought to its position which
corresponds to the, minimum flow of gas in the nozzle c or which even
corresponds to a stopping of said flow, that the plug shuts the
channel f abso 75 lutely ofi, so that no gas can pass through the cock
and inversely, when the cock is being opened, it is only after the
moment when the orifice of the gas supply channel ha's ben comiflti
Tly openedi, that the flow 80 of gas can be regulated from a zero nr
minimum value to a maximum value.
accoding to the extreme positions of the needle in -the 3 e conditions
the interi,'of the gas cock is in free communication 8 s with the gas
supplv, whatever the-adjustment to the gas discharge may be, and by
reason'of this fact, a constant pressurof the sas emerging fromr the
nozzle c is ensured at any working conditions and at 90 any
consumption of gas; a fact which ensures a constant mixture of gas and
air at the burner O (Figure 6).
SL is courseot undetistood that the device as above described may be
modified with 95 out thereby going outside of the scope of the
invention.
Having now particularly described and s scertained the nature of our
said invetition and in what manner the same is to i 00 be performed,
we declare that what we Jlaim is 1 A gas cock wherein the regulation
of the discharge is obtained by means of the displacement of a
cylindrical needle or pin i 05 within a conical nozzle, said cock
beinr arranged in such a manner, that during the whole period of
regulating the discharge, the interior of the body of the cock is in
full and free communication 110 with the gas supply pipe, the internal
pressure in the cock being thus maintained constant, and that the gas
admission starts only after the nozzle discharge has beconm a minimum
or even zero, (the nozzle bein t 115 in this case closed by the pin or
needle) and vice versa, the opening of the corn'munication between the
interior of the cock and the gas supply takes place or is opened
before the needle or pin opens 120 the passaice to the gas flow to the
dischatge nozzle.
2 G as cock according, to claim 1, characterised by the -fact, that
the plug of said cobk' id provided with a slit or M 25 slot
corresponding to the gas supply channel pr 6 vided in the body or dome
of said cock, the slid plug being provided in addition with a pin or
stop projectinginto the interior of said cock; and agcainst 130 2 or
pin of the needle valve is ensured aone of its extremities by means of
a head, forming a cam which slides within a suitable bore provided in
the plug, and is also guided at a suitable point along 35 its length
'by means of a sliding device which is provided within a rib provided
in the body of the cock, and in which a pin fixed to the said needle
or pin is free to slide 4 a 6 Gas cock as specified in claim 1,
characterised by the fact, that the camn has an acclivity or inclined
plane or slope, which passes over into a horizontal portion, the
development of said horizontal 45 i portion being of sufficient extent
to allow the plug of the cock to effect the rotational movement,
required to open the inlet orifice admitting the gas into the gas
cock, before the pin or needle is displaced 50 by reason of the action
of the spring to allow the gas to pass through the orifice of the
needle valve outlet.
Dated this 4th day of March, 1932.
J S WITHERS and SPOONER, Chartered Patent Agents, Staple House, 51 and
52, Chancery Lane, London Agents for the Applicants.
which a cam face is forced by reason of the action of a spring, said
cam faced body forming the head of the valve needle or pin, the latter
being suitably guided in i such a manner as to prevent any other
displacements except a longitudinal displacement which corresponds to
the said pin or needle being pushed more or less into the conical or
tapered portion of the gas outlet nozzle.
3 Gas cock as specified in claim 1, characterised by the fact, that
the gas outlet nozzle can be screwed on to a greater or lesser extent
to the extremity of the body of said gas cock, a featuregwhich permits
an adjustment of The limits of the regulation between a maximum and
minimum outflow of gas, and which more particularly enables the nozzle
to be comnpletely closed by said needle or pin; when the latter is in
the position permitting only a minimum outflow or discharge of gas.
4 Gas cock as specified in claim 1, characterised by the fact, that
the orifice in the nozzle comprises a cylindrical portion which passes
over into a conical portion.
Gas cock as specified in claim 1, characterised by the fact, that the
needle Rendiill: Printed for l Eis Majesty's Stationery Office, by
Love and Malcomson, Ltd -1983 and.
402-739
? ?
Display vertical position markers.<br/><br/>This option will display
the relative positions of currently selected key terms within the full
document length.<br/><br/>You can then click the markers to jump to
general locations within the document, or to specific discoveries if
you know whereabouts in the document they occur. [10][_]
Open a preview window.<br/><br/>This window will provide a preview of
any discover (or vertical marker) when you mouse over it.<br/><br/>The
preview window is draggable so you may place it wherever you like on
the page. [11][_]
Discovery Preview
(Mouse over discovery items)
[textmine.svg] textmine Discovery
« Previous
Multiple Definitions ()
Next »
Enlarge Image (BUTTON) ChemSpider (BUTTON) PubChem (BUTTON) Close
TextMine: Publication Composition
GB402739
(BUTTON) Print/ Download (BUTTON) Close
Документ
Категория
Без категории
Просмотров
2
Размер файла
70 Кб
Теги
gb402739
1/--страниц
Пожаловаться на содержимое документа