close

Вход

Забыли?

вход по аккаунту

?

ZA12KW COVER - Cadence

код для вставкиСкачать
1 OHM CLASS D
12000 WATTS RMS
U
L
T
I
M
A
T
E
C
O
M
P
E
T
I
T
I
O
N
1. SPECIFICATION
ZA12KW : 12,000 Watts RMS @ 1 ohm <1% THD, Linked Power : 24,000 Watts @ 2ohm
Input level adjustment range : 6V to 200mV
Low pass Filter adjustment range : 35Hz ~ 250Hz
Low pass Filter slope : 24dB / octave
Subsonic Filter adjustment range : 10Hz ~ 50Hz @ 24dB / octave
Phase : 0 ~ 180 degree
Bass boost range : 0dB to + 9dB
Bass Boost center frequency adjustment range : 45Hz
Minimum THD & N : < 0.1%
Connect speaker cable ( + ) on master ZA12KW amplifier to subwoofer ( + )
Connect speaker cable ( + ) on slave ZA12KW amplifier to subwoofer ( )
Connect speaker cable ( ) on master ZA12KW amplifier to speaker cable ( ) on slave
ZA12KW amplifier
Minimum daisy chain connection impedance is 2 ohm
Do not use daisy chain connection aW 1 ohm
ZA12KW MASTER AMPLIFIER
2. DAISY CHAIN CONNECTION
Daisy chain connection DOORZV\RXWROLQNWZR=$.:DPSOLILHUV
Please read the following connection diagram carefully to make correct connection.
Connect the Master ZA12KW amplifier to the head-unit6et WKH 2873870$67(5
and ,13876/$9( switch to 0$67(5 position.
Connect 0$67(5DPS WR 6/$9(ampXVLQJ5&$MDFNVDVVKRZQLQGLDJUDP.
Set 6/$9( ZA12KW amplifier 2873870$67(5 & ,13876/$9( switch to 6/$9( position.
Master ZA12KW positive terminal
to
Positive terminal of Subwoofer
ZA12KW MASTER AMPLIFIER
HeadUnit
Slave ZA12KW positive terminal
to
Negative terminal of Subwoofer
ZA12KW SLAVE AMPLIFIER
Fully adjusted signal is transferred
from master to Slave Amp via
RCA Cable.
RCA out on Master to RCA In on Slave
ZA12KW SLAVE AMPLIFIER
ZA12KW Amplifiers' Linked minimum impedance is 2 ohm.
Working Voltage is 8.5V to 18Volts
Документ
Категория
Без категории
Просмотров
17
Размер файла
1 417 Кб
Теги
1/--страниц
Пожаловаться на содержимое документа