close

Вход

Забыли?

вход по аккаунту

?

owners manual turning the gruve on and off bluetooth pairing line in

код для вставкиСкачать
CONTROLS AND FUNCTIONS
+ VOLUME -
OFF/ON
LINE IN
DC 5V
OFF/ON
LINE IN
DC 5V
1. Bluetooth indicator LED
2. Rotary volume control
3. Power ON / OFF switch
4. 3.5mm audio input socket
5. Micro USB socket
6. Power / charging indicator LED
OWNERS MANUAL
Congratulations on purchasing your VIBE Gruve portable Bluetooth
speaker. Please read this manual in order to fully understand how to
get the best results from this product and ensure that all advice on
how to look after the product is followed.
CONTENTS
• 1 x VIBE Gruve portable Bluetooth speaker
• 1 x 3.5mm audio cable
• 1 x Micro USB charging cable
• 1 x Storage pouch
SPECIFICATION
Model: VPAIRGRUVE-V1
Input voltage: 5VDC / 500Ma~1A
Input audio: Line in / Bluetooth
Input sensitivity: 580mv
Output power: 2 x 3 watts RMS
Speaker impedance: 4О©
Height: 37mm (1.5”)
Width: 243mm (9.6”)
Depth: 110mm (4.3)
TURNING THE GRUVE ON AND OFF
• To turn the Gruve on, move the power switch to the ON position, the
power LED will illuminate RED.
NOTE: If the Gruve is being charged the LED will remain GREEN
until fully charged.
CHARGING THE GRUVE
• To turn the Gruve off, move the power switch to the OFF position.
+ VOLUME -
OFF/ON
LINE IN
DC 5V
BLUETOOTH PAIRING
• Turn on the Gruve.
• The Bluetooth indicator LED will alternately flash blue and orange.
• Using your mobile phone / tablet / computer, search for VIBE
GRUVE in the Bluetooth devices menu.
• Pair with VIBE GRUVE, if you are prompted for a passkey enter
0000
• Pairing is now complete.
LINE IN
The Gruve is equipped with a line input suitable for use with any
device with a standard 3.5mm audio socket.
• Connect the device to the Gruve using the supplied 3.5mm audio
cable.
Note: When the 3.5mm audio cable is connected no Bluetooth audio
will be output as the line in will take priority.
+ VOLUME -
• The VIBE Gruve features a built in rechargeable lithium battery.
• To recharge, connect the supplied micro USB charging lead to your
computer or USB mains plug (not included) and the micro USB
socket on the Gruve.
• The power / charging indicator light will illuminate GREEN to
indicate that the Gruve is charging.
• Charging will take around 2 hours, however when charging the
Gruve for the first time it is recommended that the Gruve is charged
for at least 4 hours.
• When the battery is fully charged the indicator light will illuminate
RED .
HANDS FREE VOICE CALLING
ORIENTATION
CAUTION
The Gruve supports hands free voice calling for mobile phones
The Gruve can be used with a tablet in a variety of different ways
allowing use for many applications.
The VIBE Gruve is able to deliver high volume and extreme high
frequency sound. Exposure to prolonged high volume and/or
excessive high frequency sound may cause permanent damage to
your hearing. The volume level may differ from device to device so
caution is recommended when using the Gruve for the first time and
never listen to the Gruve at a volume that is uncomfortably loud.
Answering a phone call:
• Press the call answer button on your phone.
Ending a phone call:
• Press the call end button on your phone.
Please see the examples below.
The Gruve is also compatible with voice over IP services such as
Skype and Facetime.
SAFETY GUIDE
Landscape
Note: Compatibility and service of voice over IP cannot be guaranteed
across all platforms and operating systems.
MUSIC PLAYBACK
To Listen to Music:
• Pair and connect your phone or device to the Gruve
(see “Bluetooth pairing” section for more details).
• To play music use the playback controls on the connected device.
• If used with a phone and you answer a call while music is playing,
the music will pause until the call is ended.
Note: If a device is connected via 3.5mm audio cable it will not be
possible to play music via Bluetooth, ensure the 3.5mm audio cable is
disconnected before attempting to play music via Bluetooth
Portrait
TROUBLESHOOTING
Interference or poor sound quality:
• Ensure that you are not more than 10 metres away from your device
and that there are no obstructions such as walls between the
Gruve and device.
No sound:
• Turn the volume up button using the rotary volume control.
• Ensure that your device is paired with the Gruve and connected as
an audio device.
• Ensure that the volume is not set very low on the connected device.
• Ensure that the 3.5mm audio cable is not connected if attempting to
play music via Bluetooth
Unable to connect :
• Check the pairing settings on your device, ensure that VIBE GRUVE
is connected to media audio and phone audio if applicable.
• It may in certain cases be necessary to unpair the VIBE GRUVE and
follow the pairing procedure again.
Additional devices:
• The Gruve is primarily designed for use with Bluetooth enabled
phones and media players. It is possible however to also connect
other Bluetooth devices with version 1.1, 1.2 and 2.0 compatibility.
Some phone functions do not work:
• Please check your phone user manual to ensure that the phone has
compatibility for the feature and that the phone is correctly set up to
use the feature.
• Some applications such as Skype and Facetime may not have full
compatibility with your device and the Gruve.
Please follow the below advice before using the product.
• Reduce the volume level on the Gruve to the minimum setting
before using the product and then adjust the volume when the
product is in use.
• Keep the volume as low as possible during normal use.
• Do not use the product in noisy environments as this may have to
increase the volume to potentially harmful levels in order to hear the
music or your phone.
• If you feel discomfort or pain in your ears, immediately cease using
the Gruve and seek medical advice.
• Continuous exposure to high volume levels may cause permanent
hearing damage without any pain or discomfort.
• It may be dangerous and illegal in some countries to use the
Gruve when you are driving a car, riding a bike or operating
machinery. Please adhere to all local laws and regulations when
using this product.
• Keep out of the reach of small children.
• The packaging and products contained within including the plastic
bags are not toys. The bag and small parts may cause suffocation.
• Do not attempt to disassemble the product as no parts can be
replaced or serviced by the user. Failure to adhere to this warning
will invalidate the warranty.
• Product servicing should only be carried out by an authorised VIBE
dealer.
• Do not use the product near flammable liquids or gas as this may
cause a fire.
Typing
WARRANTY
For all warranty information relating to this product please visit the
website below:
MAINTAINANCE
• Always turn the Gruve off when not in use.
• Avoid extremely high temperatures (45°C/113°F) and extremely low
temperatures (-10В°C/14В°F). it is also recommended that the Gruve
is not stored in direct sunlight.
• Ensure that the volume is not set very low on the connected device.
• High temperatures may damage the battery and the performance
of the gruve.
• Avoid contact with water and other liquids as this may cause
irreparable damage to the Gruve.
www.vibeaudio.co.uk/warranty
Документ
Категория
Без категории
Просмотров
28
Размер файла
561 Кб
Теги
1/--страниц
Пожаловаться на содержимое документа